
CARACTERÍSTICAS TÉCNICAS:
Input/Output channel |
2Input/4Output |
2Input/6Output |
4Input/4Output |
4Input/8Output |
|
Input impedance |
Balance 20 kΩ |
||||
Output impedance |
Balance 100 Ω |
||||
PC Port |
Fornt has 1 port USB, Back has 2 port RS485 (RJ-45) |
||||
Separation |
>70dB(1KHz) |
||||
Input range |
≥ 17dBu |
||||
Frequency |
20 Hz–20KHz (0~-0.5dB ) |
||||
S/N |
>110dB |
||||
THD |
< 0.01% (Output=0dBu/1KHz) |
||||
Separation |
>80dB(1KHz) |
||||
Each Input Channel |
Mute |
√ |
|||
Delay |
Adjust range: 0-1000ms |
||||
Poalr |
In phase & reversed phase |
||||
EQ |
10 Bands PEQ, FREQ: 20Hz-20KHz, Total: 239 point, Band wirth:0.05-3oct, Step:0.05oct, Gain:±20dB, Step:0.1dB. |
||||
Output Channel |
Mute |
√ |
|||
MIX |
Each Input Channel can be selected to each Output channel |
||||
Gain |
adj range: :±12dB step: 0.1 dB. |
||||
Delay |
Each Input Channel has delay control, adj range:0-1000ms. |
||||
Poalr |
In phase & reversed phase |
||||
EQ |
Each Output Channel has 6 Bands EQ, 3 Modes: PEQ/Lo-shelf/Hi-shelf |
||||
Frequency |
LPF, HPF, PF mode:Linnwitz-Riley/Bessel/Butterworth , FREQ: 20Hz-20KHz, Total: 239 point, (Slop) : 12dB/oct, 18dB/oct, 24dB/oct, 48dB/oct. |
||||
Compresor |
Each output channel can be set individually compression adjustable parameters: threshold: ± 20dBμ, step away from the Starting time for 0.05 dBμ: 3ms-100ms, less than 1ms, in steps of 0.1ms; greater than 1ms, step. From the time of 1ms release: can be set to 2 times, 4 times, 6 times, 8 times,16 times, 32 times the starting time. |
||||
Parameter |
255 Mhz, 96 Khz sampling freq, 24 bit AD/DA conversion. 32 Bit DSP chip processor |
||||
Display |
2x24 LCD, 8 LED Input/Output level, Mute & mode can be displayed. |
||||
RMS |
≤30W |
||||
Power |
AC 90V/240V 50Hz/60Hz |
||||
Dimensions (W*H*D) |
1PC:536*410*80(mm) |
||||
Pack Dimensions |
1PCS:4.1/5(kg) |